Face shield

From Wikipedia, the free encyclopedia
A United States Navy Electrician's Mate wearing a face shield while checking for bad fuses on a lighting panel
Nurse using a face shield during the Ebola outbreak in Sierra Leone, 2014.

A face shield, an item of personal protective equipment (PPE), aims to protect the wearer's entire face (or part of it) from hazards such as flying objects and road debris, chemical splashes (in laboratories or in industry), or potentially infectious materials (in medical and laboratory environments). Depending on the type used, a face shield may protect its wearer from a physical hazard, chemical splashes, or biological hazards. [1]

Industry[edit]

A face shield is intended to protect the wearer's partial or entire face and the eyes from hazards. Face shields should be used with spectacles and/or goggles.[2]

Standards[edit]

ANSI (American Standard)
  • Mark Z87: Basic impact: Faceshields shall be capable of resisting impact from a 25.4 mm (1 in) diameter steel ball dropped from a height of 127 cm (50 in).
  • Mark Z87+: High impact: Faceshields shall be capable of resisting impact from a 6.35 mm (0.25 in) diameter steel ball traveling at a velocity of 91.4 m/s (300 ft/s). 
EN 166 (European Standard)

These shields are for protection against high-speed particles, and must withstand the impact of a 6 mm nominal diameter steel ball, striking the oculars and the lateral protection at the speed stated.

  • Mark A: 190 m/s (620 ft/s)
  • Mark B: 120 m/s (390 ft/s).
  • Mark F: 45 m/s (150 ft/s).
    • ref. EN166
CSA (Canadian Standard)

Z94.3-15 Eye and Face Protectors Class 6 relates to face shields, and is divided into 3 sub-classes

  • 6A – Impact, piercing, splash, head, and glare protection.
  • 6B – Radiation protection. Also for low heat, splash, glare, and light non-piercing impact protection.
  • 6C – High-heat applications and light non-piercing impact protection only.
    • ref. CSA Z94.3-15

See also welding helmet.

Materials[edit]

Provides excellent impact resistance, optical quality, heat resistance and normal chemical resistance.

Provides normal impact resistance, optical quality, heat resistance and good chemical resistance.

Manufacturing[edit]

Two methods are used to manufacture face shields: extrusion and injection molding. Faceshields cut from extrusion sheets provide better impact resistance than injection molded faceshields because extrusion sheets are made of high molecular weight plastic pellets while injection molding must use lower molecular weight plastic pellets, which provide better melt flowing property needed by injection molding. For example, even faceshields 0.8 mm (0.031 in) thick made of extrusion polycarbonate sheets can withstand the impact of a 6 mm (0.24 in) nominal diameter steel ball traveling at the speed 120 m/s (390 ft/s) (European standard, protection against high-speed particles – medium energy impact), while injection molding faceshields must have at least 1.5 mm (0.059 in) thickness to withstand the same impact. But injection molding can provide more complicated shape than extrusion.

During the COVID-19 pandemic, people from 86 countries engaged in the voluntary production of PPE to supplement traditional supply chains - many of which had been interrupted.[3] They collectively produced a total of 25 million face shields with techniques including 3D printing, Laser cutting, Injection molding.[4]

Medical[edit]

A laboratory technician wearing a face shield during the COVID-19 pandemic in Brazil
A video describing research on the efficacy of face shields to protect against aerosol emitted from coughing

In medical applications, "face shield" refers to a variety of devices used to protect a medical professional during a procedure that might expose them to blood or other potentially infectious fluids. An example is the use of a CPR mask while performing rescue breathing or CPR. Another example is the use of personal protective equipment to guard the face against exposure to potentially infectious materials.

Police and military[edit]

In military or law enforcement environments, a face shield may be designed for ballistic or non-ballistic protection. The non-ballistic shield will provide no protection from projectiles shot from firearms,[6] but is usually designed to withstand low velocity impacts, like caused by punches or thrown objects.[7]

A ballistic face shield is designed to stop or deflect blast and fragments from operators wearing bomb suits[8] To protect the wearers eyes and face from ballistic threats in combat is envisioned in the PEO Soldier program for the United States Department of Defense.[9]

Usage in construction[edit]

On many construction sites many workers use face shields to protect them from debris or sparks. Many tools for cutting and working with metal recommend the use of a face shield. Examples include welding equipment or metal chop saws.

See also[edit]

References[edit]

  1. ^ "What is Face Shield? - Definition from Safeopedia". safeopedia.com. Retrieved 2022-03-28.
  2. ^ ANSI Z87.1-2003, page 11
  3. ^ "DESIGN | MAKE | PROTECT". Open Source Medical Supplies. Retrieved 2021-02-22.
  4. ^ "DESIGN | MAKE | PROTECT". Open Source Medical Supplies. Retrieved 22 February 2021.
  5. ^ "GliaX/faceshield". Glia Free Medical hardware. 23 March 2020. Retrieved 23 March 2020.
  6. ^ A. Hunsicker: Behind the Shield: Anti-Riot Operations Guide Universal Publishers, 2011, ISBN 978-1612330358, p. 166
  7. ^ article: "Die Helm-Maskenkombination HMK" Archived 2019-05-08 at the Wayback Machine on polizeipraxis.de (german)
  8. ^ Ashok Bhatnagar: Lightweight Ballistic Composites: Military and Law-Enforcement Applications, Woodhead Publishing, 2018, ISBN 978-0081004067, pp. 133, 222
  9. ^ Ashok Bhatnagar: Lightweight Ballistic Composites: Military and Law-Enforcement Applications, Woodhead Publishing, 2018, ISBN 978-0081004067, pp. 396, 397

External links[edit]

Face Shield in India Clear Face Shield